Choosing the right ring size is an important aspect when buying this accessory, whether it is an engagement ring, wedding ring or just a piece of jewellery for yourself. The wrong size can cause discomfort or even loss of the jewellery. So how to get the right ring size using various methods and tools.
How to size a ring on your finger using a thread or paper strip
This method is one of the easiest and most affordable ways to determine ring size at home. Follow the step-by-step instructions for accurate measurement.
Preparation:
- Materials: You will need thin thread or a strip of paper, a pen and a ruler.
- Prepare materials: Make sure the thread or paper strip is thin enough and not stretched so that the measurement is as accurate as possible.
Measurement:
- Wrapping: Wrap a thread or strip of paper around the widest part of your finger. It is important that the material lies where the ring will sit – usually at the base of the finger.
- Marking: Mark where the ends of the thread or paper meet. Do this carefully so as not to move the thread or paper after wrapping.
Calculation:
- Length measurement: Measure the length of the marked section of thread or paper with a ruler. The result in millimetres will correspond to the circumference of your finger.
- Size matching: Compare the value obtained with the ring size chart. These tables are usually available on the internet or can be requested from your jeweller.
Tips for more accurate measurement:
- Take the measurement at the end of the day, when your fingers are usually a little swollen and larger. This will help avoid choosing a ring that is too tight.
- If there is any doubt between two sizes, always choose the larger size for comfort.
- Take climate conditions into account: in hot climates, fingers may swell, which should be taken into account when choosing a size.
How to choose a ring on your finger using a ring gauge
A ring sizer is an effective tool for accurately determining the size of a ring, which can be purchased or ordered from a jewellery shop. This tool is especially useful if you are planning to purchase an expensive ring and want to make sure it fits perfectly.
Advantages of using a ring gauge:
- Measurement accuracy: The ring gauge allows you to accurately determine your finger size, which is essential for the comfort and safety of wearing the ring.
- Try-on option: Using a ring gauge allows you to not only measure your size, but also try on rings of different sizes to see which one fits best on your finger.
The process of using a ring gauge:
- Choosing a ring gauge: Visit a jewellery shop where a ring gauge is available, or purchase one for home use.
- Trying on rings: Start with a ring that you think will fit and try the rings on, moving up or down in size. It is important that the ring can be put on and taken off freely, but does not fall off the finger by itself.
- Time of day: Take the measurement in the middle of the day when your fingers have reached their average size. In the morning and evening, the size may vary slightly due to natural changes in the body.
Additional tips:
- If you are hesitating between two sizes, it is advisable to choose the larger one to avoid discomfort with possible swelling of the fingers.
- Pay attention to the width of the ring: wider rings may require choosing half a size larger than narrower rings.
Comparison with the existing ring
If you already have a ring that is the perfect size, using it as a reference is an easy and accurate way to determine the size of your new ring. This method is especially useful if you are planning an online purchase or want to surprise someone without asking for their size directly.
How to do it:
- Preparation: Take a piece of millimetre paper and a pencil.
- Tracing the ring: Place your ring on the paper and carefully trace around it with a pencil, trying to make the line as thin and precise as possible.
- Diameter measurement: Use a ruler to measure the inside diameter of the drawn circle. For greater accuracy, take several measurements at different points on the circle and calculate the average value.
Calculation:
- Comparison with the size chart: Use the resulting diameter to compare with the ring size chart. These charts are usually available online on jewellery shop websites or can be obtained directly from the shop.
- Consideration of errors: Remember that the slightest error in measurement can lead to the selection of the wrong size. If your measurement is between two sizes, it is advisable to choose the larger one, especially if the ring is wide.
Additional tips:
- Make sure that the ring you are using as a sample fits you well. If it is a little loose or tight, it may distort the measurement results of the new ring.
- If possible, check the size on the inner rim of your existing ring, many jewellery shops list the size directly on the piece.
Consultation with a professional
When choosing a ring, sometimes the best solution may be to consult a professional, especially if you have doubts about your measurements or want the choice to be perfect. Jewellers and specialist shops offer a professional ring sizing service, using accurate tools and years of experience.
Professional Approach:
- Precise measurement: Jewellers use special ring gauges and other tools that allow them to accurately determine the size of the ring. This ensures that the ring fits perfectly on your finger without causing discomfort or risk of loss.
- Overview of options: During the consultation, you can also try on different rings with different widths and profiles to help you understand which style is the best fit.
Additional tips:
- Style and material: Professionals can recommend certain styles or materials based on the shape and characteristics of your finger. For example, for long, slender fingers, wide rings are suitable, while narrow and simple models are better for short fingers.
- Personal preference: The jeweller will take into account your preferences for design and material, and suggest options that can be not only beautiful but also functional for your lifestyle.
How to prepare for counselling:
- Prepare questions: Think in advance about what you would like to ask the jeweller. These could be questions about suitable materials, about lead times or about the possibility of modifying existing jewellery.
- Research the offerings: If you prefer specific brands or styles, research their offerings ahead of time to discuss them with your jeweller.
- Budget: Determine your budget for buying the ring so that the jeweller can tailor options to suit your financial capabilities.
Choosing the right ring size is a key aspect of ring buying that affects wearing comfort. We looked at several methods: measuring your finger with a thread or paper strip for home use, using a ring gauge for accurate measurements at a jewellery shop, comparing it to an existing ring to determine the size of a new ring and consulting a professional for perfect fit and style recommendations. These approaches will help you choose a ring size that will ensure the comfort and longevity of your jewellery.
Choose the ring that suits your needs and don’t forget to activate your reBITme cashback. Let your next purchase become even more enjoyable with savings. Happy shopping!
